HomeNewsForumShopBooks
Welcome, Guest
Username: Password: Remember me
DIY Polysynth modules and interfaces
  • Page:
  • 1
  • 2

TOPIC: Concept

Re: Concept 8 years 10 months ago #37

  • nejo
  • nejo's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 17
Oh, and if you're looking for a general-purpose MIDI bytestream parser, that was another of my little projects this year:

MIBY - MIDI Bytestream Parser

Cheers,
Neil
The administrator has disabled public write access.

Re: Concept 8 years 10 months ago #42

  • Spav
  • Spav's Avatar
  • OFFLINE
  • Moderator
  • Posts: 30
  • Thank you received: 1
Sounds like we are singing from the same song sheet, you're almost there with RS485 except that we have picked CAN as the bus, as the basic functions of addressing and broadcast recognition is supported by the hardware. Firmware updates for moudles may also be routed over this bus. Most other control and realtime functions are based around MIDI.

If you are willing to share your protocol we would love to see it.

Cheers
Mark
The administrator has disabled public write access.

Re: Concept 8 years 10 months ago #44

  • nejo
  • nejo's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 17
Try this, its on googledocs:

Comms spec

Very much work-in-progress. Still some things to iron out, and I need to work on an implementation to work out some of the other issues.

Comments welcome.

Neil
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.684 seconds
Powered by Kunena Forum